1. Bed panel: Made of 1.0mm thick carbon steel plate through one-time die pressing automotive sheet metal process, it features a multi-hole design. The neatly arranged ventilation holes not only have anti-slip function but also facilitate air circulation. A special "sun" shaped steel pipe reinforcement structure is added to the back, which greatly enhances the load-bearing capacity. The entire panel is evenly stressed, has strong pressure resistance and will never deform.
2. The structure of the back bed plate evenly distributes pressure, effectively extending the service life of the screw and the bed. At the same time, it makes the hand-shaking operation more effortless and the use more relaxed.
3. Bed frame section: The bed frame is made of 30*60mm rectangular steel pipes, with a cross-sectional steel thickness of ≥1.2mm. The welding quality of the bed body is solid and firm. The total load capacity of the bed: The static load capacity of the bed body is ≥260kg.
4. The traction frame is welded from high-quality stainless steel pipes. It is inserted into the bed at the bottom, and the upper crossbar can be moved up and down for fixation. It is equipped with a mobile pulley in the middle and can be optionally fitted with a traction hook
5. Screw: The screw features a "bidirectional limit protection" design and is made of wear-resistant materials. The transmission system is a commonly used and vulnerable part. The supplier should ensure that no plastic parts are used at any connection points.
6. Crank part: The crank sleeve must be made of stainless steel. The hand crank has an anti-slip design and a "double opening and closing" function design. Adjustment range: Back adjustment 0°- 70° (±5°), left leg adjustment 0°- 40° (±5°), right leg adjustment 0°- 40° (±5°), overall lift 500-760mm.
7. Guardrail section: Aluminum alloy guardrail, installed at a low position; Metal material switch base. The upper and lower supports of the guardrail must be injection-molded with metal parts, and the posts are designed with stainless steel pipes to ensure quality and aesthetics. The guardrail can be folded and retracted. When retracted and placed flat, it is slightly higher than the mattress to prevent the mattress from shifting.
8. Headboard and tailboard: The headboard and tailboard are blue, streamlined, firm and sturdy. It features a concealed locking switch, is easy to operate and disassemble, and can also be used for CPR first aid.
There are a total of 4 infusion stand sockets on both sides of the head and tail of the bed, which can be used by patients for infusion. There are four drainage bag hooks on the lower sides of the bed surface, which can be used to hang medicine bags, drainage bags and dirt bags, etc.
10.5-inch anti-entanglement casters, ∮20mm solid round steel insert rod type; Double-piece cover protection with "anti-entanglement" function.
11. Infusion stand: Equipped with a two-section fully stainless steel lifting infusion stand and "anti-drop" hooks.
12. The fixed feet and the movable feet with wheels can be used interchangeably: when using the fixed feet, the movable feet with wheels can be raised; when using the movable feet with wheels, the fixed feet can be raised.
13. Each nursing bed should be equipped with a sponge anti-bedsore pad. The outer cover should be fully waterproof, measuring 198*90*6cm. 2 points brown and 4 points high-density sponge.
14. Other essential equipment: dining board, storage rack.