2. Specification: The length of the bed board is 1880mm, the width is 620mm, the height adjustment is 560-890mm, and the back adjustment is 0-75°，Knee lift: 0 to 40°, tilt adjustment: -18° to 18°.
2. Safe working load: 220 kg.
3. Back lifting system: Controlled by high-quality silent gas springs.
4. High and low lifting system: Controlled by imported hydraulic cylinders, the quality is more stable.
5. Bed board: Made of Antistatic material, it has higher strength and does not deform.
6. Frame: Made of high-quality steel.
7. Guardrail panels: PP resin formed guardrail panels on both sides, with a height of 300mm, are safer for patients. They can also be fixed horizontally to increase the width of the bed, providing a comfortable place for the arm of the person receiving intravenous infusion. It is also equipped with dual safety locks for locking, preventing misoperation and enhancing the safety of operation.
8. The guardrail plate is equipped with an Angle display, which is convenient for understanding the Angle at which the back rises during maintenance. There is a groove in the middle of the guardrail plates on both sides to prevent the catheter from sliding off and facilitate the drainage of the infusion. Aluminum die-cast one-piece formed guardrail bracket, with higher strength, humanization and better appearance.
9. Casters: Four casters with a diameter of 200mm are locked by the central control system. Each corner of the trolley is equipped with a caster control system. When braking with one foot, all four wheels are fixed simultaneously. The operation of the bed is more convenient after four weeks.
10. The central control brake linkage rod is made of an integrated round tube to ensure higher strength.
11. Independent central fifth wheel system: Control pedals are installed on both sides of the trolley. When the central fifth wheel is retracted, it can move freely. When in use, that is, in the "straight line" state (the height of the pedal from the ground is 105mm, which has better passability), it overcomes the inertial force during the transportation process, effectively controls the forward direction, and makes the transportation process safer.
12. There is an integrated tray under the bed, which can hold oxygen cylinders and is convenient to use. The tray can bear a load of 10 kilograms.
13. It is equipped with an infusion stand storage rack to fix and store the infusion stand.
14. Mattress: The surface of the fabric is treated for water resistance, which is easy to clean. It is equipped with a zipper and the outer fabric is washable.